Ford Fox Body Mustang Kit Carbon Fiber/Kevlar Skin Kit

Here at Hose Candy, we have the skins that will fit hoses from 1/4" up to 2 1/2". Our Hose Skins will fit your hoses like a glove. Our sizes include:

• 1/2" Skins will fit hoses from 1/4" to 3/4"
• 1" Skins will fit 3/4" to 1 1/2"
• 2" Skins will fit hoses ranging from 1 1/2" up to 2 1/2"

We are currently working on other sizes. We are always looking to improve.

Skin-Posit Technology is a special coating that is applied to the skins so they are easier to handle. The coating makes the skins less vulnerable to fraying and virtually impossible to mess up the weave while cutting.

Yes, our kits are versatile enough to be used on a wide range of hose types and sizes, suitable for both classic and modern engines.

DragonSkin provides superior heat resistance, does not cause wear on metal finishes, and offers a high-tech look that outperforms stainless steel sleeves.

Both materials offer excellent durability and heat resistance, with Carbon Fiber/Kevlar ideal for tight bends and DragonSkin excelling in extreme temperature environments.

Measure the outer diameter of your hose carefully using a caliper or a flexible tape measure. Ensure that the measurement falls within the size range specified for each kit: 1.25 to 2.25 inches O.D. for Carbon Fiber/Kevlar and .755 to 1.25 O.D. for DragonSkin.

Absolutely. The Carbon Fiber/Kevlar Hose Skins can be trimmed using sharp scissors to fit your specific application. DragonSkin, while tougher to cut due to its high-temperature resin saturation, can still be sized with a sharp blade or heavy-duty scissors.

Installation generally takes about 15 to 30 minutes, depending on the accessibility of the hoses and your familiarity with the process. No special tools are required beyond a heat gun for the Boa Clamps and Super Shrink.

Carbon Fiber/Kevlar Hose Skins are flexible and can tightly conform to bends greater than 90 degrees without kinking or weakening. DragonSkin, on the other hand, is better suited for less severe bends, as it can crease if the bend radius is too tight (greater than 60 degrees). It’s perfect for areas with moderate curves or straight runs.

Yes, both types of Hose Skins can be removed if necessary. The process involves carefully cutting the skin along the length of the hose. It is recommended to do this cautiously to avoid damaging the underlying hose.

Yes, both Carbon Fiber/Kevlar and DragonSkin materials are highly resistant to all types of automotive fluids, including oil, coolant, and brake fluids. This makes them ideal for use in various parts of the engine where fluid exposure is common.